TeamSpeak 3 - Rank/Level up system - v1.2.1

[X-Ecutioner]

The creation time is not an issue only for you. it's general.
The reason is because you server was created with server version 3.0.12.4 or less.
The creation date is shown only if your server was created with 3.0.13 and newer because in these versions it show the time you actually create the server.
In 3.0.12.4 the creation is a month (don't remember which) and year 1970.

ok Thanks, work fine with 3.0.13.6.
But icons don't work I can't show they

 

[SociopathicTV]

Hey everybody. Fist of all I want to say thank you. I found this project by googling and its amazing work.

But i might be to stupid to get it running. I installed the latest version and configured everything on my windows server.
But if I click on "Start Bot" it just shows this:

And the bot wont start... Of course my Server has all requirements that where listed on the original post here on the Forum. I googled for 2 hours now and couldnt find anything, could you give a tip?

Here 2 Scrrenshots for further info:

 

[senheiser]

Hey everybody. Fist of all I want to say thank you. I found this project by googling and its amazing work.

But i might be to stupid to get it running. I installed the latest version and configured everything on my windows server.
But if I click on "Start Bot" it just shows this:

And the bot wont start... Of course my Server has all requirements that where listed on the original post here on the Forum. I googled for 2 hours now and couldnt find anything, could you give a tip?

Here 2 Scrrenshots for further info:

I think your serverquery client cant connect to the ranksystem..

 

[SociopathicTV]

Ok thank you I will check on that deeper.

But I already tried 3 different. Also the one serveradmin given on server setup...

 

[senheiser]

Ok thank you I will check on that deeper.

But I already tried 3 different. Also the one serveradmin given on server setup...

Try to connect via putty, if you get no error the query can log in

 

[SociopathicTV]

Connection with putty works fine with various query accounts.. damn it

 

[BLUESKULLUNEEKAK]

Hey everybody. Fist of all I want to say thank you. I found this project by googling and its amazing work.

But i might be to stupid to get it running. I installed the latest version and configured everything on my windows server.
But if I click on "Start Bot" it just shows this:

And the bot wont start... Of course my Server has all requirements that where listed on the original post here on the Forum. I googled for 2 hours now and couldnt find anything, could you give a tip?

Here 2 Scrrenshots for further info:

i have the same issue

 

[SociopathicTV]

@BLUESKULLUNEEKAK I would like to tell you something positive but i still didnt find a solution...

@senheiser Do you have another idea?

 

[Erza86]

Hello, i dont know what you are using but this may could help:
https://github.com/Newcomer1989/TSN-Ranksystem/issues/265

there are also a lots of issues and solutions on it, so you may found there an solution.

also be sure you added the Com extension (PHP) (its needed only on Windows)

The Dev is currently not available since 1-2 weeks, no one knows why so the help is very limited

regards

 

[BLUESKULLUNEEKAK]

Hello, i dont know what you are using but this may could help:
https://github.com/Newcomer1989/TSN-Ranksystem/issues/265

there are also a lots of issues and solutions on it, so you may found there an solution.

also be sure you added the Com extension (PHP) (its needed only on Windows)

The Dev is currently not available since 1-2 weeks, no one knows why so the help is very limited

regards

Thanks for Your Help Finally it shows up
http://imgur.com/a/KU2EF

but the bad news

it doesn't actually start and in stats page not connected [i am sure ServerQuery Have Right username and password]
http://imgur.com/a/8KCXY
http://imgur.com/a/T0Tte

and if i click Connect to TS3 it connect me in teamspeak client correctly

 

[SociopathicTV]

also be sure you added the Com extension (PHP) (its needed only on Windows)

I LOVE YOU.
It works

@BLUESKULLUNEEKAK Did you forget that aswell?

 

[BLUESKULLUNEEKAK]

@Erza86 Thanks
solved that error by editing phpcomanding.php

but again the bad news

the bot stops every hour

Edit :
when i checked server log i see

3/3/2017 12:20:51 VirtualServerBase Info query client disconnected 'RankSystem'(id:1) reason 'reasonmsg=connection lost'
3/3/2017 12:27:58 VirtualServerBase Info query client disconnected 'RankSystem'(id:1) reason 'reasonmsg=connection lost'

 

[Erza86]

Well a Connection lost is in most case an Server / connection issue - you may can go around it if you create a task scheduler, what executes all 10-5min:

"path/to/ranksystem/worker.php check"

then you have at least only a "time of lose" of 10min or 5min.

regards

Erza86

 

[BLUESKULLUNEEKAK]

Well a Connection lost is in most case an Server / connection issue - you may can go around it if you create a task scheduler, what executes all 10-5min:

"path/to/ranksystem/worker.php check"

then you have at least only a "time of lose" of 10min or 5min.

regards

Erza86

Could you please show me steps ?

 

[Erza86]

unfortunately i do not use windows systems, so i don't really have a clue how to do it in the correct way

 

[doxxa]

Thanks, so far so good! Works perfectly

 

[Corne]

Hi Guys. Ive got a hassle or two. Please help me out

Thank you very much for your awesome RankSystem! Id love to start using it.
ive got the site running and everything seems good. All my settings are configure but the bot wont start yet.

I get the following error when starting the bot (IP address changed to a bunch of 0`s)

2017-03-16 21:20:09.261546 ERROR Error 0: php_network_getaddresses: getaddrinfo failed: Name or service not known
2017-03-16 21:20:09.197410 INFO Connect to TS3 Server (Address: "000.000.000.000" Voice-Port: "9999" Query-Port: "10011").
2017-03-16 21:20:09.197379 INFO Ranksystem Version: 1.2.1
2017-03-16 21:20:09.197318 INFO Check files permissions [done]
2017-03-16 21:20:09.193789 INFO Check files permissions...
2017-03-16 21:20:09.192677 INFO No newer version detected; Database check finished.
2017-03-16 21:20:09.192614 INFO Check Ranksystem database for updates.
2017-03-16 21:20:09.188502 INFO Initialize Bot...

I have another basic bot (JTS3) running from this server that works fine. I can telnet to the server on port 10011 and dish out commands without hassle.
Please note i using the IP Address to connect to the server, NOT the DNS name
The Rank Systems and the teamspeak is on two different physical Machines

Running on 3.10.0-327.18.2.el7.x86_64 GNU/Linux CentOS
Other services on the server also runs fine.

I also tail -f the teamspeak logs to check for a login, but it does not seem to hit the teamspeak server.
Although my other bot (On the same webserver) polls my teamspeak server just fine. (Using the same ip src ipaddress, dst ipaddress, query port and UDP port)

Just to show some testing

[fatty@localhost htdocs]# telnet 000.000.000.000 10011
Trying 000.000.000.000...
Connected to 000.000.000.000.
Escape character is '^]'.
TS3
Welcome to the TeamSpeak 3 ServerQuery interface, type "help" for a list of commands and "help " for information on a specific command.

I did this on the CLI, but the error i copied was taken from the webinterface

In the meantime i tried it on another server CentOS 7.2 with php55w (including all the needed php packages) but im still getting the same message/problem. Still using the IP address.
Can you share your exact environment where the the rankbot runs fine in?
Stuff like linux version, exact php modules. Exact apache, httpd packages. etc...

I also delete and reconfigure everything on both my linux servers. Im sure it has something to do with php, but i cannot figure out what.

 

[Manius]

Hello! And how to add Crona to reset it himself? Because I'm throwing a bot out of the server and how not reset it manually does not work

 

[Erza86]

How do you mean that?

You want to Reset the whole ranksystem?
or
You want a Cronjob what checks if the bot is still up?

regards

 

[Some_body]

Hello guys
I need some help
How can I fix that :

Please use the webinterface only via HTTPS!<br>
An encryption is critical to ensure your privacy and security.<br>
To be able to use HTTPS your webserver needs to support an SSL connection.

I.m use it on Linux Debain